Key Features
• 2 x Angler Glamour 300Ws Monolights
• 1 x EX100A 100Ws Monolight
• 1 x 24 x 24" Softbox
• 1 x Backlight Stand: 2-Section, 3' Tall
Angler Glamour Flash 300Ws Overview
B&H has put together this Angler 3-Monolight Portrait Backlight Kit for photographers who require a three-point setup with versatile modifiers and lights with quality performance features for the studio or on the road. The kit includes two Angler 300Ws monolights with reflectors, an Impact EX100A flash head with a 24 x 24" softbox, a three-foot backlight stand, two 43" white translucent umbrellas, and two eight-foot air-cushioned light stands.
Angler Glamour Flash 300Ws Monolight
The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to Full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to Proportional to simulate power adjustments to enable previewing of your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head's test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.
LED Screen
Highly visible LED screen makes the power setting adjustment easy even in dim light
Adjustable Power
Power is adjustable from over 4 stops from 1/16 to Full power
Touchpad Control
Easy to use touch pad instead of switches
Modeling Lamp
Full on mode can be adjusted to proportional mode that automatically matches the flash power so you can preview your lighting
Auto Dump
Flash automatically drains capacitors for accurate exposures when lowering the power
Rubber Coating
Provides a grippy surface and helps protect the flash from impact damage
Optical Slave
Good for multi-light setups, the built-in slave allows the flash to be wirelessly triggered from another flash
Included Sync Cord
The 1/8" (3.5mm) mini-plug sync cord connects camera to flash or optional radio receiver
UPC: 847628589247
Impact One-Monolight Kit (120 VAC)
The Impact One-Monolight Kit (120 VAC) is an economical 100-watt/second monolight with modeling light and power variator. This kit includes a softbox with mounting ring, to soften the light output.
The included 24 x 24" softbox has a silver interior for crisper highlights.
PC sync cord with monoplug is included.
Line sync voltage is only 4.3 VDC (safe for any camera's circuitry).
UPC: 847628011243
Impact Two Section Back Light Stand (3')
This 3' Impact Back Light Stand consists of a base and riser. Use the lower part as a base to place a mounted light at floor or table level, as low as 5.5". Add the extension to the base to raise the height of the light from 22.8" (57.9 cm) to a maximum of 3' (90 cm). The stand is constructed of black anodized aluminum.
Quick Set Up
Sets up easily in the matter of seconds
Very Stable
Stable under recommended loads
5/8" Reversible Stand Mount
Fitted with a reversible 5/8" top stud, with 1/4"-20 and 3/8" threads
UPC: 847628011939
Impact Umbrella - White Translucent (43")
Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.
Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.
This Impact 43" White Translucent Umbrella is suggested for use in mid-length portraits for one or two persons.
UPC: 847628013292
Impact Air-Cushioned Light Stand (Black, 8')
This aluminum Impact Air-Cushioned Light Stand rises to a height of 8' and folds down to 29.6". The stand has sure-twist section locks and 4 sections and will support up to 8 lb.
If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
Air Cushioned
Protects equipment from impact damage.
Compact Design
Will fit easily into most location cases.
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
