Key Features
• Electronic Ballast
• Active Line Filter
• DMX Support
• Four-Leaf Barndoor
• The ARRI M40 HMI System with High Speed Ballast features the M40 HMI fixture with a high-speed 2500/4000W electronic ballast with an Active Line Filter and DMX support, a four-leaf barndoor set, and a 50' head-to-ballast cable. The M40 is a lens-less fixture with a wide focusing range that offers a powerful 2500 or 4000W daylight-balanced light source. It works with the high speed ballast's Active Line Filter for minimal power fluctuations and color shifts as well as DMX support for dimming from a control panel. Included with this system are a four-leaf barndoor set for making slight adjustments to the light direction and a 50' head-to-ballast cable.
• ARRI M40 HMI Head
• The ARRI M40 HMI Head is a location work horse. Whenever you need to punch light through a silk or bounce light off a reflective surface, an M40 is the ultimate answer. At the design stage, the interaction of lamp, reflector and converter lens was taken into consideration and computer simulated, resulting in unmatched performance. The M40 can be fitted with a 2,500 or 4,000W single-ended HMI lamp, making it a very versatile lighting fixture.
• The M40 uses lensless MAX technology to combine the characteristics of a Fresnel and PAR source. With a focus range of 18 - 52°, normally only achieved with supplementary lenses, the M40 outperforms the brightness of its predecessor, the ARRISUN 40/25 by approximately 30% while throwing an even beam with sharp shadows. Innovations include CCL, which compensates for power loss when using long cables and Cross Cooling which separates the electronics from the lamp housing, thus ensuring greater longevity of the head and lamp.
• Structurally, the M40 employs a robust, tubular steel yoke and disc brakes to safely lock down the head when tilting. The head weighs in 6.6 lb lighter than its predecessor due to intelligent design, while it's still able to use all of the ARRISUN 40/25's accessories. Don't worry about moist locations either; the M40 has an IP23 weather-resistant rating.
• CCL
• The lamphead is equipped with a CCL module (compensation for cable loss). When operated with the ARRI EB 2.5/4 kW ballast with CCL, full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output independent from cable length.
• Steel Yoke with two Disc Brakes
• In order to hold even the heaviest accessories safely in place, the M40 sports a tubular steel yoke and two disc brakes. A single, robust steel handle allows one-hand operation for tilting.
• Accessories Reusable
• The M40 has the same accessory diameter as the current ARRISUN 40/25 so that existing barndoors and scrims can be reused.
• Cross Cooling
• Like all True Blue ARRI lampheads, the 40 implements Cross Cooling and thus allows safe operation even at extreme tilt angles. The electronics housing is spaced apart from the actual lamp housing to keep temperatures down and prolong the lifetime of electronic components. It is easy to open and to maintain.
• IP 23
• For outdoor use the M40's IP23-rated weather resistance withstands even driven rain.
• ARRI 4-Leaf Barndoor Set for ARRI 2K Studio Fresnel
• This is an ARRI 4-Leaf Barndoor Set for the ST5 5000W Studio Fresnel. Barndoors attach to the front of a light and are used to restrict light from areas of a set. ARRI barndoors are heat resistant and rotatable.
• ARRI Head to Ballast Cable - 50' (15.2m)
• This is an Arri 50' Head to Ballast Cable that connects the Arri Compact HMI 2.5K, 4K, Arrisun&Arri-X 40/25 HMI lights to their ballasts.
Rental Inclusions-
1 LED HMI Light
1 Stand
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
