Key Features
• Supports HERO7 and Similar-Sized Cameras
• Fits HERO Session via Included Adapter
• IP67 Water-Resistant
• Unlimited 360° Pan and Tilt Rotation
• Feiyu WG2 Overview
The Feiyu WG2 is a 3-axis wearable and mountable gimbal stabilizer without the standard handle. It directly supports the GoPro HERO7 Black/Silver/White, HERO6 Black, and HERO5 Black action cameras, as well as a variety of other cameras of similar shape and size including the HERO4/HERO3+/HERO3 without a BacPac LCD, the YI Technology 4K/4K+, and select SJCAM and AEE models. It also supports the GoPro HERO Session via an included adapter. A knob with a sliding arm and leveling system on the mounting platform allows you to quickly balance whatever camera you use.
The WG2 weighs only 0.6 lb without a camera and can be used mounted/worn on a helmet, chest support, handlebars, selfie stick, desktop tripod, and other supports. Featuring a 1/4"-20 threaded mounting hole on the bottom and one on the rear, it can flexibly be attached in standard, vertical, or inverted orientation.
The gimbal is built with three motors and an algorithm that's especially optimized for wearable operation. The algorithm, which calculates the rotation angle, is designed with improved anti-jamming capability for high-frequency jitter and high-speed motion scenarios.
The gimbal offers unlimited 360° pan rotation, unlimited 360° tilt rotation, and 70° roll-angle rotation. One of the selectable modes of operation is an autorotation mode that allows you to assign a pre-set travel route with start and end points and a constant speed. This mode can be used for automated standard video capture as well as effective time-lapse photography.
A single button on the front turns the gimbal on and off and toggles between modes. An LED on the front confirms the selected mode and indicates battery status. The WG2 operates on a built-in 1500mAh battery that runs for approximately 2.5 hours and can be recharged in about 2 hours.
The WG2 also comes with a free-to-download Feiyu ON app (iOS/Android) that allows for remote control operation of the gimbal, adjusting the settings, and firmware updates. An optional Feiyu remote control (model # WGWR) is also supported.
The gimbal is IP67 water-resistant, dust-resistant, and splash-proof. It can be used in under 3' of water for up to 10 minutes, as well as used safely in rain or snow.
The WG2 folds and packs away compact into a supplied splash-proof carrying case.
Key Features
• Wearable and mountable 3-axis gimbal stabilizer
• Supports GoPro HERO6 Black, HERO5 Black, and similar-sized cameras
• Supports GoPro HERO Session via included adapter
• Optimized algorithm for wearable operation
• Unlimited 360° pan and tilt rotation, 70° roll angle rotation
• Autorotation mode with assignable travel route for video capture and time-lapse photography
• 2.5-hour built-in 1500mAh battery
• Includes Feiyu ON app for iOS and Android
• IP67 water-resistant to depths of 3 ft for approximately 10 minutes
• Folds away into compact, splash-proof carrying case
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
