Key Features
• Total of 1500Ws, 120 VAC
• 3 x VC-500WLN Digital Monolights
• Digital Readout
• 3 x Kit Stands, 7" Reflectors
Impact VC-500WLN Overview
The Impact VC-500WLN 3-500Ws Digital Monolight with Transmitter Kit is built around three VC-500WLN flash heads. Each head comes with a reflector, flashtube, 250W modeling lamp, power cable, and light stand. The included 16-channel, 4-group radio transmitter triggers the head's built-in receivers from up to 328' away. Three white umbrellas with black backing, a 24 x 36" softbox with silver interior and speedring, and a wheeled case are also included.
The VC-500WLN 500Ws Digital monolights have full to 1/32 power range adjustable over 6 stops in 1/10 stop increments, very fast recycling time (1.5 seconds @ full power) and Proportional, Independent and Off settings for the 250W modeling light. Flash durations as short as 1/1200 sec freeze action with moving subjects while the VC-500WLN's 5600K color temperature remains constant within +/- 100K regardless of power setting.
You can freely mix and match your remote flash units with the VC-500WLN. The flash's 7 optical slave modes allow it to interface with an on-camera TTL flashes, triggering with up to 5 pre-flashes when needed. The VC-500WLN's Time Frame and Block Time functions enlarge the unit's circle of compatibility with the many brands available by effectively adapting for the differences in their pre-flash durations. Selected settings are indicated on the VC-500WLN's digital display when activated by the user.
A number of systems are employed to increase the VC-500WL's longevity and ensure safety. The fan-cooled housing with adaptive thermal control protects the flash heads CMOS circuitry and the user-replaceable modeling lamp and flash tube.
Attributes and Benefits
• Built-in 2.4 GHz wireless receiver with 16 channels and 4 distinct groups of flashes
• Included 16-channel, 4 group radio remote control transmitter for wireless control of up to seven lights from distances up to 328' to adjust functions like flash power, the modeling lamp, audio beep, and slave mode
• 6-stop stepless power control range from full to 1/32 in 1/10 stop increments
• Fast 0.2-1.5 sec recycling time
• An easily-read LED display on the rear of the unit that indicates output and other settings chosen by the user
• Pre-flash Detector System to enable use of a wide range of on-camera flashes
• Multiple Modeling Light Modes: Proportional, Independent, Off
• Soft-start function of the modeling lamp to protect the subject's and photographer's eyes, and increase the working life of the lamp
• Sturdy, functional, and professional aluminum alloy housing
• Anti-static, tactile rubberized surface treatment provides comfort and utility
• Two Kinds of Recycling Reminders: Programmable ready beep function and modeling lamp visual indicator; modeling lamp dims during recycling and comes on again when fully recycled
• Fan-cooling provides longevity for the head's electronics, flashtube, and modeling lamp
• Over-Heating Protection: Slows recycling time to reduce heat, rather than delay the shoot for a cool-down interval
• 12.5-amp fuse shuts the head down if necessary to prevent damage by electrical spikes
• Low 5 VDC sync voltage protects your camera's electronics
• Power Auto-dump drains excess power from the capacitors when you reduce the output to guaranty accurate exposures
• Stand bracket with extra umbrella fitting for larger umbrella shafts
• Shifting pan/tilt support allows you to use large, pro-sized accessories
• Compatible with S-type reflectors: choose from a wide assortment of light-shapers that use the S-type mount
• Three white umbrellas with permanent black backing soften the light and set up quickly
• Softbox with Speedring: 24 x 36" softbox with silver interior and removable front diffuser and interior baffle; reflective interior to minimize light loss, removable diffusers maximize creative options
• The sturdy, wheeled, padded case with ample room for everything in the kit; separate zippered compartments keep stands and umbrellas apart from the fixtures
Rental Inclusion-
1 Set of Lights
2 Set of Soft Box
3 Set of Stands
Carry Case
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
