Key Features
• 800W Joker2 Head with Cable
• 5600K Lamp, 800W Ballast, Beamer
• 25' Extension Cable
• Fresnel Frosted Lens with Ring
• The Joker2 800 Kit from K 5600 Lighting is built around a Joker2 800W Head with an 800W HMI lamp. The included optical beamer with specular reflector mounts on the front of your Joker2 and gives you the ability to use the provided medium, wide, super wide, and frosted Fresnel lenses to get a soft source with varying degree patterns. The head is powered by the included fully dimmable ballast. The ballast is high-speed with 300 and 1000 Hz frequencies, and offers built-in wireless DMX control via LumenRadio, allowing for control using a smartphone or tablet.
• Further accessories included in the kit are a 25' head feeder extension cable, which will come in handy whenever you want to boom your Joker2 or put it in a hard-to-reach place, and a frosted glass beaker, which can be used instead of the clear glass beaker to get a nice diffused soft effect right at the source. Also provided are full double and single scrims, a four-leaf barndoor, a breaker safety wire, a lens bag, and a carrying case.
• K 5600 Lighting Joker2 800W Head with Cable
• The Joker2 800 with Cable from K 5600 Lighting is an 800W controllable light source designed for use on film, television, and still sets. Featuring a threaded screw-on ring, the Joker2 800 allows for quick and tool-less relamping between separately available 3200K and 5600K HMI lamps. The threaded ring also allows you to mount a clear or frosted borosilicate beaker around the lens (beakers and lenses available separately). Additionally, the head incorporates a plug-in igniter designed to convert from HMI to 2K tungsten in less than a minute.
• The Joker2 has an integrated three-axis yoke for flexible placement, and a braking system that ensures the system can support larger light shapers such as light banks, ellipsoid spots, and Softubes. For power, the head uses a separately available fully dimmable ballast. The ballast is high-speed with 300 and 1000 Hz frequencies, and offers built-in wireless DMX control via LumenRadio, allowing for control using a smartphone or tablet.
• K 5600 Lighting 800 Watt Hot Restrike HMI Lamp for Joker Bug 800
• This is a K5600 800 Watt HMI Bulb. It is single ended, bi-post and hot-restrike capable.
•
• UPC: 664608239912
• K 5600 Lighting 800W High-Speed Dimmable Ballast
• Run your Joker2 800W on this dedicated 800W High-Speed Dimmable Ballast from K 5600 Lighting. Able to work at frequencies of 300 or 1000 Hz, this ballast is designed to enable high-speed shots. It offers built-in wireless DMX via LumenRadio for control via a smartphone or tablet.
• K 5600 Lighting 800W Optical Beamer
• Shape and direct your Joker2 800W's throw by using the Optical Beamer from K 5600 Lighting. Mounted on the front of your Joker2, this beamer is a specular reflector giving you the ability to use the separately available medium, wide, super wide, and frosted Fresnel lenses.
• K 5600 Lighting Extension Cable for Joker 200, 400, 800, Blackjack 400 - 25'
• The K5600 C0900U 25' Extension Cable connects the Joker 200, 400, 800 integral light head cable to a ballast. It is a VEAM type, with quarter-turn lock. The C0900U cable is also compatible with the Blackjack 400 head.
• K 5600 Lighting Lens for Joker-Bug 800W - Frosted Fresnel
• The K5600 Frosted Fresnel lens fits inside the ears on the Beamer. By diffusing and spreading the beam angle, it changes the light properties to that of a fresnel light.
• 44° beam spread.
• K 5600 Lighting Lens for Joker-Bug 800W - Super Wide Flood
• The K5600 Super Wide Lens provides a 44° spread of light when fitted to a K5600 Joker-Bug 800 watt fixture.
• K 5600 Lighting Lens for Joker-Bug 800W - Wide Flood
• A replacement wide flood lens that spreads the light in a narrow, wide beam (41° x 12°) from a K5600 Joker Bug HMI light head.
• K 5600 Lighting Lens for Joker-Bug 800W - Medium Flood
• Spreads the light beam, allowing it to cover a larger area than it would if the Beamer was used alone. Fits inside the ears of the Beamer.
• 25° x 13° beam spread.
• K 5600 Lighting Scrim, Full Double for Joker-Bug 800W
• This is a full double scrim for the K5600 Joker-Bug 800W HMI, or any other fixture that accepts an 8.75" accessory.
• Full scrims dim the light across the entire beam spread, 1/2 and graduated scrims are used to even the beam spread when lighting a subject or background from an angle.
• Keep several densities of scrims available, to be prepared for any lighting situation.
• K 5600 Lighting Full Single Scrim for Joker-Bug 800
• This K5600 Lighting Full Single Scrim for Joker-Bug 800 fits the Bug or any other fixture that accepts a 7.75" accessory. This scrim absorbs approximately one stop of light. Scrims dim the light across the entire beam spread, 1/2 and graduated scrims are used to even the beam spread when lighting a subject or background close-up or from an angle.
• K 5600 Lighting 4-Leaf Barndoor for Joker 800
• This is a 4-Leaf Barndoor Set for the K5600 Joker Bug 800.
• Barndoors narrow the beam spread of a light fixture. They help create a 3-dimensional look to a lighting scheme by placing light in a specific area or by keeping it away.
• The more leaves a barndoor set has, or the longer the leaves, the more precisely the beam can be controlled.
• K 5600 Lighting Beaker - Frosted Glass for Joker-Bug 800W HMI
• The Frosted Beaker is used on the Joker-Bug 800 with accessories such as lanterns where the point source is not desirable. It also helps clean up Par lens aberrations, as well as soften the harsh spot achieved without a lens.
• K 5600 Lighting Beaker - Clear Glass for Joker-Bug 800W HMI
• This glass filter comes standard with all Joker-Bug 800 Fixtures. Its purpose is to protect the HMI bulb.
• K 5600 Lighting Lens Bag with Partitions for Joker 400 Lenses (4-Count)
• The heavy-duty Lens Bag with Partitions from K5600 Lighting is designed to hold four Joker-Bug 400 lenses, which are 6-5/8" in diameter each.
• K 5600 Lighting Carrying Case for Joker 800W
• This is a K5600 Carry Case for Joker 800. It is an impact-resistant hard case, with interior padding and partitions for a K5600 Joker Bug 800 watt head, ballast, cables, beaker, barndoors, and bulb. The case has two wheels that come in handy when two of the same are stacked together.
Inclusions-
1 LED HMI Light
1 Stand
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
