Key Features
• 100-240 VAC, US/North American Plug
• 1 x 4Bank Fixture (2')
• 1 x 4Bank Ballast
• 2 x Double Fixtures (2')
Kino Flo 4Bank Overview
The 2' 4Bank 3-Light Interview Kit from Kino Flo is well-suited to location shooting or use in a small studio. The kit contains one 2' 4Bank fixture, two 2' Double fixtures, ballasts for each light, three 25' extension cables, three stand mounts, two lamp cases and a wheeled, hard shipping case. The ballasts have a US/North American plug.
Both Single and Double fixtures feature built-in barndoors, removable reflectors and a louver (grid). The lights can be disassembled and used with only the electrical harness to allow you to build a softbox. A wide range of optional True Match lamps are available in tungsten and daylight balance as well as specialty lamps for chroma key work or color effects. The ballasts offer 100-240 VAC operation for worldwide use, individual switchable lamps and dead quiet flicker-free performance.
Kino Flo 4Bank Fixture (2')
The 2' 4Bank Fixture from Kino Flo is a 4-lamp fluorescent light that outputs the equivalent of a 500W softlight while consuming a fraction of the traditional fixture's electrical draw. When used with a standard or DMX ballast (purchased separately) the light has 2 or 4 lamp switching to vary the power output as well as standard and High Output settings to avoid color shifting associated with dimming. Unlike other ballasts, Kino Flo's optional ballasts can be located up to 75' from the head with no power loss, solving the problem of adjustments when the light is hung overhead. Optional True Match lamps that feature a high CRI of 95 are available in 3200K or 5600K color balance.
Benefits
• 4-Lamp remote fixture with built-in barndoors
• Fixture includes removable lamp harness, reflector and louver
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to be hand-held or taped to a wall
• Removable optional center mount
• Optional High Output (HO), flicker-free ballasts
• High color rendering (CRI 95) with optional True Match lamps in 3200K and 5500K
• Visual effects lamps available in 420nm blue, 550nm green for blue and green screen application
• UL listed, CE approved
Kino Flo 4Bank Ballast
The 4Bank Ballast from Kino Flo is designed to power the 4' or 2' versions of the 4-lamp 4Bank fluorescent fixture. The silent, flicker-free ballast, specifically developed for film and video production, has 4-lamp on/off switching, runs on 100-240 VAC current and can power the fixture up to 75' away using optional head-to-ballast extension cables. It has a special Select switch to raise or drop wattage for output and color control.
Benefits
• High output, flicker-free ballast
• Universal input voltage from 100-240 VAC can be used anywhere in the world
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Low amperage draw
• Same ballast runs 4' and 2' lamps
• UL listed, CE approved
Kino Flo 2' Fixture Shell for 4Bank
Keep your Kino Flo 2' 4Bank light in tip-top shape by replacing the Fixture Shell. This shell is available here as a replacement or spare.
Kino Flo 2' 4Bank Locking Harness
This Kino Flo 2' 4Bank Locking Harness is a connector harness for the Kino Flo 4Bank fixture with 2' fluorescent lamps. A color-coded locking connector for each lamp is attached as part of the harness, which connects to the power source.
For the Kino Flo 2' 4Bank fluorescent fixture
Color-coded connectors for each lamp
Kino Flo Reflector for 2' Single Fixture
A metallic reflective panel, used for bounce lighting or simply to redirect light.
Kino Flo 2' 4Bank Louver (Black)
The Kino Flo 2' 4Bank Louver (Black) is part of the standard 4Bank fixture that also includes the removable louver, reflector and lamp harness. The Louver adds a degree of directionality to the soft, wide beam of the 4Bank allowing greater control of its effects.
Kino Flo Ballast for Double Fluorescent Light
The 3.3 lb Ballast for Double Fluorescent Light from Kino Flo powers the 2' or 4' Double lamp heads via a front panel switch and has a USA/North American plug. It is flicker-free, dead silent, has 1-2 on/off lamp switching and accepts 100-240 VAC line voltage. An optional baby mount allows you to mount the ballast on a light stand on any grip gear with a 5/8" stud.
Kino Flo MTP-BC41 Mount with 5/8" Curve Receiver
The MTP-BC41 Mount with 5/8" Receiver from Kino Flo is a redesigned version with improved bearings for more gripping power and enhanced jaws for greater flexibility. The mount has a curved design with a baby (5/8") receiver for light stands. It fits Select, Celeb 201 and 401, Double, Diva-Lite, and Tegra fixtures.
Kino Flo Extension Cable for 4-Bank Fixture - 25'
Extends the range of one of the Kino Flo's 4-Bank fixture components.
25 feet long.
Kino Flo Double Extension Cable for Double System - 25'
Kino Flo 25' Double Extension cable, for Double System. Allows operation of the fluorescent tubes away from the ballast or fixture.
Kino Flo T12 6-Lamp 2' Carry Case
Kino Flo T12 6 Lamp Carry case hold up to 6- 2 ft long flourescent tubes.
Kino Flo KAS-INT3 Interview Kit Ship Case with Wheels (Black)
Store, protect, and transport a Kino Flo 2' 4Bank lighting system, or two 2' double systems, with the black Kino Flo KAS-INT3 Interview Kit Ship Case with Wheels. This sturdy case features vinyl-clad plywood construction with reinforced edges and corners. Users will appreciate the custom-cut interior, recessed butterfly latches, and spring-action handles. The handles facilitate two-person carrying. Wheels on one end make travel over flat ground easier.
nk
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
