Key Features
Bundling high performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor is part of the 2018 unified DSMC2 lineup and is designed to be built up the way you want, to tell your story in almost any way possible. Since the DSMC2 form factor is standard, accessories from RED and other manufacturers can be easily attached to accessorize your camera. Even though the GEMINI sensor has fewer photosites than its HELIUM and MONSTRO brethren, it has a cool trick up its sleeve. Using advanced circuitry designed for the aerospace industry, the GEMINI can switch native sensitivities. Practically speaking, it can operate in both normal and dimly lit scenarios without prematurely blown highlights or excessive noise, respectively. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.
REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding, though if you prefer a proxy workflow, ProRes or DNx files can be recorded simultaneously to the MINI-MAG media. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.
The GEMINI 5K Super 35mm sensor features dual sensitivity modes. Use Standard mode for conventional shooting scenarios. Switch to Low Light mode for increased sensitivity, but without the increased noise floor commonly found through signal manipulation.
The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.
Note: Not all compression ratios are available at all resolutions and frame rates
For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.
Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.
Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
Variable number of 3D LUT outputs with DSMC2 expander module
User-programmable shaper 1D LUTs
Tetrahedral interpolation, 16-bit processing
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
