Key Features
• US Power Cable
• Variable Color: Tungsten to Daylight
• Hue, Saturation, Light Intensity Control
• Plus / Minus Green Control
• Flexibility and control are key to the creation of the Gemini 2x1 Bi-Color LED Soft Panel with Standard Yoke and US Power Cable from Litepanels. The aluminum-constructed, 25.0 x 6.5 x 12.5" fixture has 3 lighting modes. The CCT color temperature control has 6 factory presets in increments from 2700 to 6000K. There are also 6 presets for user-defined color temperature and plus/minus green control. The HSI Color mode allows you to adjust the hue, saturation, and intensity, while Gel mode permits your choice from a library of filters often used by image makers. A firmware update adds a Lighting Effects Mode that includes TV simulation, hue burst, paparazzi, strobe, fire, squares, fireworks, emergency lights, pulse and party lights. The light has a CRI/TLCI rating of 97 for daylight balance and 99 for tungsten balance, indicating a very accurate rendition of color. The Gemini is dimmable from 100 to 0% without flicker or color shift. Settings and features are displayed on the rear LCD screen.
• All of these adjustments can be made locally on the unit or remotely via a console, thanks to the Gemini's built in DMX. There's even the option of wireless DMX or Bluetooth control via a separately purchased remote module. The Gemini is ready for worldwide use, thanks to its built in 100 to 240 VAC power supply but it can also run on batteries when power is unavailable.
• The Gemini has a number of convenience features, such as the ability to stack and gang several lights together with an optional yoke and hardware. You can also daisy-chain multiple lights together in Master/Slave mode, allowing a single designated "Master" light to control the others. This version of the Gemini ships with a standard yoke and a US power cable.
• 3 Lighting Modes
• • CCT (Correlated Color Temperature) mode allows for bi-color (daylight to tungsten) operation with the addition of plus and minus green adjustment
• • HSI Color mode allows for full color control over hue, saturation, and intensity
• • Gel mode allows for a variety of gels to be selected from the menu
• Firmware Update for Special Effects
• A firmware update adds a Lighting Effects Mode that includes TV simulation, hue burst, paparazzi, strobe, fire, squares, fireworks, emergency lights, pulse and party lights.
• Performance
• • Flicker-free at any frame rate or shutter angle at any intensity level
• • Smooth dimming from 100 to 0%, with no color shift
• • Energy efficient - fixture draws only 325W nominal
• • No heavy external ballast or restrike period
• Presets
• • Program user presets on Channel A, which records color and intensity. It also has factory presets on channel B with increments for 2700 to 6000K plus six user-programmable presets
• Control
• • Master/Slave mode - connect multiple lights together and control them all from a single master light
• • Optional Bluetooth and wireless DMX modules allow the brightness, color, and cooling mode to be remote controlled
• • Intuitive and ergonomic controls for dimming, color, and fixture set up
• Power Options
• • AC/DC power with DC battery power via 3-pin XLR
• Durability and Design Features
• • Aluminum core construction to provide maximum durability and superior thermal management
• • Durable, industry standard powerCon locking power connector with ability to daisy chain power
• • Yoke with Junior pin for easy mounting and positioning
• • LCD screen displays vital settings and status
• •Barndoor/honeycomb accessory rails
• Photometrics
• Daylight
4317 lux / 389 fc @ 5.0' (1.5 m)
1079 lux / 97 fc @ 10' (3.0 m)
459 lux / 43 fc @ 15' (4.6 m)
Tungsten
3624 lux / 326 fc @ 5.0' (1.5 m)
906 lux / 82 fc @ 10' (3.0 m)
385 lux / 36 fc @ 15' (4.6 m)
Terms & Conditions :-
Please Do the health check of booked equipment before taking them out on rent from the store...
Once equipment booked for a specific time slot cannot be cancelled in between.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Delivery and pic up of the booked equipment's are subject to availability of the runners on the floor.
Any technical issue will not be consider as rental discount, it can be considered in case of hardware issue.
At the time of delivery if equipment's working fine then discount will not be considered.
Any delay in recurring on accessories will be charged Rs. 200/- per day. (Such as battery, charger, memory cards and cables etc.)
At the time of pickup of equipment 80% security cheque of MRP value of the product cheque must be provided.
Rental period is for 24 hour.
Pick-up and delivery charge is depend upon the availability of runner Rs. 300/- per side charge is applicable.
In case of emergency we will charge 50% of the booked equipments of the rental cost if cancelled within 48 hours.
Taxes is extra i:e GST.
Fully payment is made at the time of pick-up of equipments (100% Advance).
Cash and card payment is accepted.(Cheque is after realization of payment).
Rental service is for only Delhi NCR Customers.
Collect your security cheque if you haven't taken any rental equipment within 03 month OR 90 days.
One camera body consist of (one battery & charger, one memory card, neck strap, and camera case).
In case of damage or theft or any loss of the equipment's you will be responsible for repair or replacement as the case maybe.
Damage check will happen once the product products reaches our office.
For rental service we have a registration process below listed documents is required for registration :
1. In case of individual registration any two documents (like: PAN Card, Voter ID, Driving License, Passport, Aadhaar, Gas connection bill electricity bill, rent agreement valid date and government employee ID Card etc.)
OR
2. In case company registration any two documents (Like: company pan card, list of directors on letter head of company, MoA, company electricity bill and water bill etc.)
3. Rs. 100/- cheque in favour of "RGB Films Private Limited".(Non Refundable) {For the purpose of verification of signature and account activation.}
4. At the time of pick-up of equipment's 80%of MRP value of the products security cheque must be provided. Once you returned the equipment's the cheque will be returned.
5. Bank statement of last one month or at least 10 Last Transaction.
6. One passport size photo.
7. The registration process takes 03-pt working Days for the completion of registration process.(Rs 100/- cheque must be credited before renting .)
8. Only Delhi NCR documents is accepted.
9. For outside Delhi special approval is required.
10. Fill the complete rental form.
11. Kindly, go through the terms & condition before renting and registration.
To Receive Latest Offers and Discounts From The Rent.
